- Brand Name: KEMiMOTO
- Origin: Mainland China
- Item Length: 14.2inch
- Item Type: Covers & Ornamental Mouldings
- Item Weight: 8kg
– Condition: Aftermarket 100% Brand New
– Material: Metal + Aluminum + Stainless steel
– This item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically.
– Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to sit upright while parked.
– No Installation Instructions. (Please feel free to contact us if you need help.)
①Electric Stand 2009-2016
Fits for Touring Bagger Models 2009-2016
Does NOT work with a cross under exhaust
for Electra Glide Fire/Rescue FLHT 2014
for Electra Glide Low Ultra Classic FLHTCUL 2015-2016
for Electra Glide Low Ultra Limited FLHTKL 2015
for Electra Glide Police FLHTP 2014
for Electra Glide Ultra Classic FLHTCU 2014
for Electra Glide Ultra Classic FLHTCU 2015-2016
for Electra Glide Ultra Classic Project Rushmore FLHTCU 2014
for Electra Glide Ultra Limited FLHTK 2014
for Electra Glide Ultra Limited FLHTK 2015
for Road Glide CVO Ultra FLTRUSE 2015-2016
for Road Glide FLTRX 2015-2016
for Road Glide Special FLTRXS 2015-2016
for Road Glide Ultra FLTRU 2016
for Road King CVO FLHRSE6 2014
for Road King CVO Project Rushmore FLHRSE 2014
for Road King Fire/Rescue FLHR 2014
for Road King FLHR 2014
for Road King FLHR 2015-2016
for Road King Police FLHP 2014
for Road King Project Rushmore FLHR 2014
for Road King Shrine SE FLHR 2014
for Street Glide CVO FLHXSE 2015-2016
for Street Glide Firefighter SE FLHX 2014
for Street Glide FLHX 2014-2015
for Street Glide FLHX 2016
for Street Glide Special FLHXS 2015
for Street Glide Special FLHXS 2016
1.CAN NOT Fit With The Cross-Under Exhaust Pipes.Models with Legends Air Ride installation requires separate purchase of plumbing and line kit
2.Motorcycles must have electric shock absorbers for electric center stand to work.(electric shock absorbers not included)
3.Before you buy,please check this part to make sure it can fit your motorcycle or not.
②Electric Stand 2017-2021
Fit For Touring Models 2017-2021
CAN NOT Fit With The Cross-Under Exhaust Pipes.
③Rear Air Tank Ride Suspension Kit
– Aftermarket 100% brand new
– This is a complete kit assembled to replace your stock touring shocks with height-adjustable air shocks.
– Fully Collapsed approx. 9.64inches(245mm); fully extended 14.2inches(360mm).
– This kit will allow you to lower your bike 2 to 3 inches with all of the air released.
– The air it up to stock ride height for a smooth ride in a matter of seconds.
– Installation instructions Included
– System uses all nickel-plated brass high-flow high-pressure push-to-connect fittings throughout the entire system, and a manifold-style dump valve block for optimum performance. This kit includes all of the components for a fully functional, fully height adjusta ble rear air suspension.
– With this kit, you can ride with zero air pressure without rubbing. That means you can cruise around with your bike SLAMMED, or also if you ever lost air pressure for any reason you can still ride without rubbing your tire against your fender (on most '09-Later models, or '08-earlier models with stock rear tire, contact us for details).
Fits For Touring models 1994-2019
*Please ensure this parts fit for your motorcycle before purchasing.
*Please allow there might be 2-3cm errors of dimension data due to pure manual measurement.
*Due to difference between different monitors,there might be slightly color difference due to different light and monitor effect.
*Thank you for understanding and support.